How to test your keyboard: every key, rollover and chatter
The keyboard tester in step 1 is our own free tool.
A key that has stopped working is easy to spot. A key that types twice, or one that drops out when you hold three others in a game, is harder to pin down. Here’s how to check every key, measure rollover and catch a failing switch.
Quick answer
| What you want to check | Best option |
|---|---|
| Every key works, on any computer | 1. Our Keyboard Tester |
| How many keys register at once | 2. Max rollover in our tester |
| A key that types twice | 3. The Chatter panel in our tester |
| A rough check with no website | 4. A text editor or Keyboard Viewer |
1. The quickest check: an online keyboard tester
The fastest way is our own Keyboard Tester. It shows a drawing of a keyboard that lights up as you press keys, and it works on Windows, Mac, Linux and Chromebook in any modern browser.
- Open usefultools.fyi/keyboard-test and press Start test, or click the drawing.
- Choose ANSI (US) if your Enter key is wide and flat, or ISO (UK/EU) if it’s tall with an extra key next to Left Shift. Choose No numpad for a laptop or tenkeyless board.
- Press every key once. Each key lights while it’s held and stays shaded afterwards.
- Check the Not tested yet list for anything you missed.
- Press Esc twice, or click outside the tester, to stop.
While the test runs, keys such as Tab, Space, Backspace, the arrows and the F-keys don’t scroll the page or open browser features, so you can press them freely. Nothing you type is saved or uploaded.
Some keys never reach a web page, whichever tester you use. Fn is handled inside the keyboard, and Windows or Cmd shortcuts, media keys and sometimes Print Screen are taken by the system first. If one of those keys does its normal job outside the browser, it works.
2. Test how many keys work at once (rollover)
This matters most for games. Hold keys down one at a time without letting go, and watch Max rollover in our tester. When the number stops rising, or a key you press doesn’t light up, you’ve reached the keyboard’s limit for that group of keys. Test the combinations you actually use, such as W, A, Shift and Space together.
Why it happens: most budget keyboards wire their keys in a grid of rows and columns. With certain three-key combinations held, the controller can’t tell for certain which keys are down. To avoid reporting a key you never pressed (a “ghost” key), it usually blocks the next one instead. People tend to call both effects ghosting. Keyboards with a diode on each switch don’t have this problem and are sold as anti-ghosting or n-key rollover (NKRO).
One catch: a USB keyboard in its basic “boot” mode can report only six normal keys plus the modifiers. An NKRO keyboard may therefore show 6 in some modes. Check its software or manual for an NKRO setting.
As a rough guide, 3 or 4 keys at once is plenty for typing. For games, 6 or more is comfortable.
3. Catch a key that types twice (chatter)
Chatter is when one press registers as two or more, usually because a switch is worn or dirty. Our tester flags a key that goes down again very soon after it was released, or that goes down twice without a release in between. You can set that window in the Chatter panel, from 20 to 80 ms.
- Press the suspect key slowly, 20 to 30 times.
- Watch the Chatter events count and the key log underneath.
- One warning on its own can come from a very fast tap or a wireless keyboard resending a signal. If the same key keeps getting flagged, the switch is chattering.
4. Built-in checks with no website
You can do a rough check without a tester:
- Any computer: open Notepad on Windows or TextEdit on a Mac and type every key, row by row. It shows dead letters and double typing, but it’s hard to check Esc, the F-keys or the arrows this way.
- Mac: in System Settings → Keyboard, open the input source settings and turn on Show Input menu in menu bar. Then choose Show Keyboard Viewer from that menu. Keys highlight on the on-screen keyboard as you press them.
Neither method shows rollover or measures chatter.
Common problems and fixes
- One key doesn’t respond at all. Clean under it with short bursts of compressed air, or pull the keycap off on a mechanical keyboard. Try another USB port, or fresh batteries on a wireless keyboard.
- A whole row or group of keys fails together. That points to the keyboard’s wiring or cable rather than individual switches. On a laptop, spilt liquid is a common cause.
- Quick taps are ignored but held keys work. On Windows, check that Filter Keys is off under Settings → Accessibility → Keyboard. It’s designed to ignore brief key presses. On a Mac, check Slow Keys in the Accessibility keyboard settings.
- A key types twice. Clean it first. Many gaming keyboards, and boards running QMK or VIA firmware, let you raise the debounce time. On a hot-swap board, replace the switch.
- The number pad moves the cursor instead of typing numbers. Num Lock is off. Press it once.
- The wrong symbols appear, such as @ and ” swapped. The keyboard is fine, but the computer is set to a different layout, often US instead of UK. Change the keyboard layout in your system’s language settings.
Practising for speed? Our Spacebar Counter counts presses against the clock, and the Click Speed Test does the same for your mouse.