Webcam Test – Check Your Camera Online

Preview your camera and see the resolution and frame rate it really delivers. Nothing is recorded or uploaded.

Press Start camera. Your browser will ask for permission.

Camera is off
Requested resolution
–Actual resolution
–Frame rate (reported)
–Measured FPS
–Aspect ratio
Track settings
Device
–
Facing mode
–
Requested
–
Capabilities (what the driver says it supports)
Width–
Height–
Frame rate–
Aspect ratio–
Facing mode–

No snapshot yet. Start the camera and press Take snapshot.

Snapshots are saved as PNG at the camera's full resolution. They stay on your device.

How to use the webcam test

  1. Press Start camera and allow access. The preview appears and the camera's indicator light should come on.
  2. Read the numbers. Actual resolution is the size of the frames arriving right now. Frame rate (reported) is what the driver claims, while Measured FPS counts the frames that really reach the page.
  3. Press 720p, 1080p or 4K. The page asks for that size as an “ideal”, and the browser picks the closest mode the camera offers. The capabilities table lists the range the driver admits to.
  4. Use Take snapshot to check sharpness and colour at full resolution, and download it if you want to compare later.

Why the resolution is lower than advertised

Many browsers open a camera at 640 × 480 unless a site requests more, and video call apps usually send less than your camera captures, depending on their settings and your connection. A box that says “1080p” may also mean 1080p at a reduced frame rate, or an image upscaled from a smaller sensor. If 1080p is accepted but measured FPS drops to 5–15, the camera is probably sending uncompressed frames over a slow link (see USB below).

Light and exposure

Webcam sensors are tiny. In a dim room, auto-exposure keeps the shutter open longer, and a 1/15 s exposure allows at most 15 frames per second. The picture gets grainy and motion smears. Switch on a lamp in front of you and watch the measured FPS rise. A bright window behind you turns your face into a silhouette, so face the light instead.

USB bandwidth

Uncompressed 1080p at 30 fps needs about 1 Gbit/s, more than USB 2.0 can carry. Webcams therefore compress high resolutions (MJPEG or H.264) or fall back to low frame rates. Two cameras on one hub, or a camera sharing a port with a capture card, can fail to start or stutter. Plug the camera straight into the computer, and use a USB 3 port for 4K models.

Privacy: the light and browser permissions

While any page uses your camera, the browser shows a camera icon in the tab or address bar, and most cameras light an indicator LED. Press Stop camera: the light should go out, which confirms the page released it. You can review or revoke camera access for every site in your browser's site settings.

Testing for Zoom and Teams

  • Press Stop camera before joining a call, because on Windows a webcam often works in only one app at a time.
  • Select the same camera in the app (Zoom: Settings → Video; Teams: Settings → Devices). Zoom sends HD only if you tick HD there.
  • Your self-view is mirrored by default in both, but others see the unmirrored image.

Check your sound with the mic test too. For the rest of your desk, the keyboard tester and gamepad tester cover input devices.

Frequently asked questions

Is my video recorded or sent anywhere?
No. The preview goes straight from your camera to this browser tab. Nothing is recorded, and a snapshot exists only in the page until you download it to your own device. Press Stop camera or close the tab to switch the camera off.
Why does my 1080p webcam show only 640 × 480?
Many browsers start at a small size unless the page asks for more. Press 1080p to request it. If the actual resolution stays lower, the camera, its driver or the USB connection cannot deliver that size, or another app has fixed the camera to a lower mode.
Why is the measured FPS lower than the reported frame rate?
The reported value is what the driver promised; the measured value counts frames that actually reach the page. Dim light (longer exposure), a busy computer or a crowded USB hub lowers it. In browsers without requestVideoFrameCallback the measurement cannot exceed your screen's refresh rate.
Why is my picture mirrored?
A mirrored preview feels natural, like a bathroom mirror, so it is on by default. Video apps normally send the unmirrored image, so others see text on your shirt the right way round. Untick Mirror to see what they see.
It says the camera is in use. What can I do?
Close other apps and tabs that might hold it: Zoom, Teams, Skype, OBS, Discord or the system Camera app. If that does not help, unplug the camera, wait a few seconds and plug it back in, or restart the browser.
Can I test the front and back camera of my phone?
Yes. After you start the camera, pick another entry from the camera list. On phones the table shows the facing mode (user for the front camera, environment for the back).