How to check a controller for stick drift
The online tester in step 1 is our own free tool.
Stick drift is when your character walks or the camera turns with nobody touching the stick. It’s one of the most common faults on modern controllers, and it’s quick to check. Here’s how to measure it, tell whether it matters, and what to do next.
Quick answer
| Situation | Best option |
|---|---|
| Any controller, on a PC or Mac | 1. Our Gamepad Tester |
| You play through Steam | 2. Steam’s controller settings |
| Windows, no browser | 3. Windows Game Controllers panel |
| Nintendo Switch | 4. The Switch’s stick calibration |
What stick drift is
Most controller sticks measure their position with two small potentiometers, one for each direction. A contact slides along a resistive track, and over time the track wears and collects dust. The stick then no longer reports dead centre when you let go, so the game sees a small, constant push.
Every stick rests slightly off centre, even when new. Games ignore a small area around the centre, called the deadzone, for exactly this reason. Drift only becomes a problem when the resting position falls outside the deadzone your game uses.
Hall effect sticks measure a magnet instead of a sliding contact and don’t wear in the same way, which is why they are sold as drift-resistant.
1. Test it online with our Gamepad Tester
The quickest way is our own Gamepad Tester. It works with Xbox, PlayStation DualShock 4 and DualSense, Switch Pro and many other controllers, with nothing to install.
- Connect the controller by USB or Bluetooth.
- Open usefultools.fyi/gamepad-test and press any button. Browsers hide controllers from web pages until you press a button while the page is open, so moving a stick may not be enough.
- Let go of both sticks and read Offset now under Left stick and Right stick.
- Set the Deadzone radius slider to the deadzone your game uses. The Drift check line tells you whether the resting position is inside it or outside it.
- Push each stick to one side and let it spring back, in several directions. A stick that returns to a different spot each time is worn.
- Rotate each stick slowly around its outer edge a few times to fill in the Circularity reading.
Reading the results: a new stick usually rests within a few per cent of the centre. If Drift check says the stick is outside the deadzone while you’re not touching it, a game with that deadzone will notice. Circularity is the average gap between the edge the stick reached and a perfect circle. Lower is rounder, but some controllers report a squarer shape on purpose, so compare the same controller over time rather than different brands.
While it’s connected, press every button too. The drawing lights up each one, the triggers fill as you squeeze them, and a counter shows how many buttons you’ve pressed at least once. In Chrome and Edge you can also test the motors with Rumble both motors (1 s), Strong motor only and Weak motor only. Those buttons are greyed out where the browser doesn’t offer vibration.
2. Steam’s controller settings
If you play through Steam on a PC, its Settings → Controller page lists each connected controller, with options to test its inputs and calibrate it. Steam Input can also set a stick deadzone per game, which is a handy way to hide mild drift.
3. Windows Game Controllers panel
Windows still has its old controller panel. Search the Start menu for Set up USB game controllers, or run joy.cpl. Select your controller and press Properties to see the stick positions and buttons. Some controllers can be calibrated from the same window. Xbox controllers show both triggers on one shared axis here, which is normal and not a fault.
4. Consoles
On a Nintendo Switch, System Settings → Controllers and Sensors → Calibrate Control Sticks shows each stick’s position and lets you recalibrate it. PlayStation and Xbox consoles don’t show detailed stick values in the same way, so the easiest check is to connect the controller to a computer and use a tester.
How to fix stick drift
- Raise the deadzone. Many games have a deadzone setting, and Steam Input can set one too. If the drift is small, this hides it completely.
- Clean around the stick. Push the stick to one side and blow short bursts of compressed air into the gap, then rotate it a few times. This sometimes clears dust from the sensor.
- Update the firmware with the maker’s app, such as Xbox Accessories, or when your console offers an update.
- Recalibrate in the Windows panel or on a Switch, where available.
- Use the warranty or replace the stick. If the controller is still covered, a claim is usually better than opening it. Replacing a stick module means soldering on most controllers, and Hall effect replacement modules are available for some models.
Common problems with testing
- The tester doesn’t see the controller. Press a face button such as A or Cross while the page is open. Try a different cable, because some USB cables only charge, and close Steam, which can take over controllers.
- The buttons on the drawing are in the wrong place. If Mapping shows anything other than standard, the browser doesn’t know the controller’s layout. Use the raw Buttons and Axes tables, and tick Plot raw axes 0–3 as sticks to draw the sticks anyway.
- The vibration buttons are greyed out. Firefox and Safari usually don’t let web pages use the motors. Try Chrome or Edge. The motors may still work in games.
- The Switch Pro buttons look swapped. Face buttons are reported by position, so the bottom button (B on the controller) shows as button 0.
Setting up for PC gaming? Our Keyboard Tester checks how many keys register at once, and the Mic Test checks your headset for voice chat.